Skip to content

build(deps): bump hackney from 4.9.1 to 4.10.1 in /copi.owasp.org - #3787

Open
dependabot[bot] wants to merge 1 commit into
masterfrom
dependabot/hex/copi.owasp.org/hackney-4.10.1
Open

dependabot[bot] wants to merge 1 commit into
masterfrom
dependabot/hex/copi.owasp.org/hackney-4.10.1

Conversation

@dependabot

@dependabot dependabot Bot commented on behalf of github Nov 13, 2026

Copy link
Copy Markdown
Contributor

Bumps hackney from 4.9.1 to 4.10.1.

Release notes

Sourced from hackney's releases.

4.10.1

Fixed

  • The insecure request option was ignored on HTTPS connections, pooled or not: certificates were still verified, so a server with a self-signed certificate was refused. It now disables verification as documented, for HTTP/1.1, HTTP/2 and HTTP/3.
  • {verify, verify_none} in ssl_options did not turn off verification: the default hostname check still ran and refused self-signed certificates. It now skips that check, and HTTP/3 honors it too.
  • insecure set in connect_options made HTTPS requests fail with badarg. It now disables verification like the top-level option.

4.10.0

Security

  • A server could make hackney buffer an unlimited amount of data despite max_body_size, by sending an HTTP/1.1 chunked body made of one very large chunk: the limit was only checked once a whole chunk had arrived. Chunk data is now handed on as it arrives, so the limit holds and streamed reads no longer wait for the end of a chunk. A chunk-size line longer than 4096 bytes or a size of more than 16 hex digits is now refused.

Changed

  • An HTTP/2 or HTTP/3 request made when the connection is at the server's limit on concurrent streams now waits for a free stream instead of failing at once. Many servers allow 100 or 128 at a time, so a burst of requests used to fail where HTTP/1.1 would have queued them. A request waits up to checkout_timeout, then fails with checkout_timeout. Based on work by Lennart Schoch (#972).
  • A request the server refused without processing it, because of a GOAWAY, an HTTP/2 refused stream or an HTTP/3 rejected request, is now sent once more on a fresh connection, whatever its method. It used to fail, and most callers did not know that error was safe to retry. A body given as a function is not sent twice. Based on work by Lennart Schoch (#971).
  • quic 2.6.1, h2 0.15.0 and webtransport 0.5.3. These bring fixes for an HTTP/3 header block that could keep a CPU busy for minutes, and for two HTTP/2 denial-of-service attacks (MadeYouReset and SETTINGS flood), plus many protocol conformance and reliability fixes.
  • WebTransport now speaks draft-17 over HTTP/3 and draft-16 over HTTP/2. Servers on older drafts may no longer connect; a draft07 compat mode is available for draft-07 servers. WebTransport over HTTP/2 now needs TLS 1.3.
  • When an HTTP/3 server closes the connection with an error code, the error you get now carries that code and phrase instead of reporting a normal close.

... (truncated)

Changelog

Sourced from hackney's changelog.

4.10.1 - 2026-11-10

Fixed

  • The insecure request option was ignored on HTTPS connections, pooled or not: certificates were still verified, so a server with a self-signed certificate was refused. It now disables verification as documented, for HTTP/1.1, HTTP/2 and HTTP/3.
  • {verify, verify_none} in ssl_options did not turn off verification: the default hostname check still ran and refused self-signed certificates. It now skips that check, and HTTP/3 honors it too.
  • insecure set in connect_options made HTTPS requests fail with badarg. It now disables verification like the top-level option.

4.10.0 - 2026-11-09

Security

  • A server could make hackney buffer an unlimited amount of data despite max_body_size, by sending an HTTP/1.1 chunked body made of one very large chunk: the limit was only checked once a whole chunk had arrived. Chunk data is now handed on as it arrives, so the limit holds and streamed reads no longer wait for the end of a chunk. A chunk-size line longer than 4096 bytes or a size of more than 16 hex digits is now refused.

Changed

  • An HTTP/2 or HTTP/3 request made when the connection is at the server's limit on concurrent streams now waits for a free stream instead of failing at once. Many servers allow 100 or 128 at a time, so a burst of requests used to fail where HTTP/1.1 would have queued them. A request waits up to checkout_timeout, then fails with checkout_timeout. Based on work by Lennart Schoch (#972).
  • A request the server refused without processing it, because of a GOAWAY, an HTTP/2 refused stream or an HTTP/3 rejected request, is now sent once more on a fresh connection, whatever its method. It used to fail, and most callers did not know that error was safe to retry. A body given as a function is not sent twice. Based on work by Lennart Schoch (#971).
  • quic 2.6.1, h2 0.15.0 and webtransport 0.5.3. These bring fixes for an HTTP/3 header block that could keep a CPU busy for minutes, and for two HTTP/2 denial-of-service attacks (MadeYouReset and SETTINGS flood), plus many protocol conformance and reliability fixes.
  • WebTransport now speaks draft-17 over HTTP/3 and draft-16 over HTTP/2. Servers on older drafts may no longer connect; a draft07 compat mode is available for draft-07 servers. WebTransport over HTTP/2 now needs TLS 1.3.

... (truncated)

Commits
  • 82fceb7 Merge pull request #1010 from benoitc/release/4.10.1
  • ced03cf Release 4.10.1
  • 4132cc6 Merge pull request #1009 from benoitc/fix/insecure-followups
  • 5f69563 Honor insecure in connect_options and verify_none on HTTP/3
  • 4bc4b56 Merge pull request #1008 from benoitc/fix/top-level-insecure
  • 5d16190 Honor the top-level insecure option and a bare verify_none
  • adb347f Merge pull request #1007 from benoitc/release/4.10.0
  • 26fabb1 Release 4.10.0
  • a4d2efa Merge pull request #1006 from benoitc/fix/goaway-retry
  • e4976f5 Merge remote-tracking branch 'origin/master' into fix/goaway-retry
  • Additional commits viewable in compare view

Dependabot compatibility score

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

  • @dependabot rebase will rebase this PR
  • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
  • @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
  • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
  • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
  • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Bumps [hackney](https://github.com/benoitc/hackney) from 4.9.1 to 4.10.1.
- [Release notes](https://github.com/benoitc/hackney/releases)
- [Changelog](https://github.com/benoitc/hackney/blob/master/NEWS.md)
- [Commits](benoitc/hackney@4.9.1...4.10.1)

---
updated-dependencies:
- dependency-name: hackney
  dependency-version: 4.10.1
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
@dependabot
dependabot Bot requested review from rewtd and sydseter as code owners November 13, 2026 06:53
@dependabot dependabot Bot added dependencies Pull requests that update a dependency file elixir Pull requests that update elixir code labels Nov 13, 2026
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

dependencies Pull requests that update a dependency file elixir Pull requests that update elixir code

Projects

None yet

Development

Successfully merging this pull request may close these issues.

0 participants