Getting Started

Getting started

1. Set up a coal boiler and give it water and a furnace fuel. Try bucket interaction or supply water using a separate Power Advantage drain-and-pipe line.
2. Connect the boiler to a steam tank with steam pipe. With no other load, the tank should gain steam. Look at the tank's actual contents or comparator output rather than relying on pipe appearance.
3. Add a rock crusher to the steam line. Insert an item with an MMDLib crushing recipe; a potato is a simple test when Power Advantage Revived's starch recipe is loaded. Leave the output free and check for the result.
4. Add a steam switch to an isolated branch. Aim the outlet toward the machine and apply redstone. The downstream machine may keep working on its stored steam after the valve closes.

For a save check, record tank contents and the crusher inventory, save and stop the game or server, then reopen and run the same load. Do not replace blocks before checking the saved setup.

No steam? Check water, valid fuel, the valve's direction and signal, and whether the machine's receiving tank can accept steam. Steam but no crushing? Check the current recipe and output capacity.