diff --git a/Extension/bin/messages/cs/messages.json b/Extension/bin/messages/cs/messages.json index e207091f9..648f44390 100644 --- a/Extension/bin/messages/cs/messages.json +++ b/Extension/bin/messages/cs/messages.json @@ -2713,11 +2713,11 @@ "Nepovedlo se inicializovat metadata.", "Neplatné přetypování mezi základní a odvozenou třídou (skutečný typ odvozené třídy je %t)", "Neplatný přístup k %n v objektu s úplným typem %t.", - "%sq not allowed here", - "%sq does not permit multiple declarators", - "initialization with \"{...}\" is not allowed for %sq", + "%sq tady nesmí být", + "%sq nepovoluje několik deklarátorů", + "Inicializace pomocí „{...}“ není pro %sq povolena", "%sq musí být zástupný symbol pro úplný typ proměnné (ne pro komponentu tohoto typu).", - "a variable declared with %sq requires an initializer", + "Proměnná, která je deklarovaná pomocí %sq, musí mít inicializátor", "Konstanta typu integer musí být větší nebo rovná nule.", "Typ musí být integrální typ.", "Výraz se nedá interpretovat.", @@ -3750,7 +3750,7 @@ "Zkrácená syntaxe šablony funkce není standardní pro vodítka dedukce", "explicitní parametry „this“ jsou funkcí C++23", "specifikátory pole se v kontextech dedukce šablony nepodporují", - "the second argument must be an integer type with the same shape (a scalar or vector type) as the first argument", + "druhý argument musí být celočíselného typu se stejným tvarem (skalárního nebo vektorového typu) jako první argument", "argument musí být vektorem logických typů", "argument musí být ukazatel na skalární typ", "nesprávný typ argumentu (měl by být %t)", @@ -3783,20 +3783,20 @@ "Typ není podobný jazyku C kvůli tomuto lambda výrazu", "Kvalifikátor názvu výčtového typu je funkce jazyka C++11", "Neomezené sjednocení je funkce jazyka C++11", - "a pack expansion cannot be used as an argument for non-pack %n1 of %n2", - "the range passed to the metafunction cannot be iterated", - "interpreter:", + "rozšíření balíčku nelze použít jako argument pro nebalíčkový %n1 z %n2", + "rozsah předaný metafunkci nelze iterovat", + "interpretátor:", "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", - "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", + "volání „__builtin_constexpr_diag“ vyžaduje tři argumenty", + "První argument ve volání „__builtin_constexpr_diag“ musí být 0 (poznámka), 1 (upozornění), 2 (chyba), 16 (poznámka v místě volání), 17 (upozornění v místě volání) nebo 18 (chyba v místě volání).", + "pro značku a zprávu ve volání „__builtin_constexpr_diag“ je vyžadován řetězcový literál nebo objekt s reprezentací std::string_view", + "Značka ve volání __builtin_constexpr_diag může obsahovat jenom písmena, číslice a podtržítka.", "invalid tag in constexpr diagnostic control option: %s", - "a token sequence must be introduced by \"^^\"", - "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", - "%sq does not spell an identifier", - "the operand of a \"\\{...}\" interpolator is not a token sequence", + "sekvenci tokenů musí uvádět „^^“", + "očekával se interpolátor („\\[“, „\\[:“, „\\{“, „\\val“ nebo „\\str“)", + "%sq nepředstavuje identifikátor", + "operand interpolátoru „\\{...}“ není sekvence tokenů", "Tato deklarace %n nedeklaruje stejný typ jako deklarace %p" ] diff --git a/Extension/bin/messages/de/messages.json b/Extension/bin/messages/de/messages.json index ebfb0abb9..c2bbe6cb9 100644 --- a/Extension/bin/messages/de/messages.json +++ b/Extension/bin/messages/de/messages.json @@ -1695,8 +1695,8 @@ null, "Für die Vektoroperation sind identische Elementtypen erforderlich.", "Die Vektoroperation gilt nicht für Vektoren mit nicht integralem Typ.", - "Die Datei %s kann nicht geöffnet werden: %sq2.", - "Die -Datei %s kann nicht geöffnet werden: %sq2: %s3.", + "Die %s-Datei %sq2 kann nicht geöffnet werden.", + "Die %s-Datei %sq2 kann nicht geöffnet werden: %s3.", "Vorkompilierte Headerdatei", "Vordefiniertes Makro", "Generierter C-Code", @@ -2715,7 +2715,7 @@ "Ungültiger Zugriff auf %n im Objekt des vollständigen Typs %t.", "%sq ist hier nicht zulässig.", "%sq erlaubt nicht mehrere Deklaratoren.", - "initialization with \"{...}\" is not allowed for %sq", + "Die Initialisierung mit „{...}“ ist für %sq nicht zulässig.", "%sq muss ein Platzhalter für den vollständigen Typ der Variablen sein (nicht für eine Komponente dieses Typs).", "Für eine mit %sq deklarierte Variable ist ein Initialisierer erforderlich.", "Die Integerkonstante muss größer oder gleich NULL sein.", @@ -3789,14 +3789,14 @@ "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", - "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", + "Ein Aufruf von „__builtin_constexpr_diag“ erfordert drei Argumente.", + "Das erste Argument in einem Aufruf von \"__builtin_constexpr_diag\" muss 0 (Anmerkung), 1 (Warnung), 2 (Fehler), 16 (Anmerkung bei Aufrufer), 17 (Warnung bei Aufrufer) oder 18 (Fehler bei Aufrufer) sein.", + "Für das Tag und die Nachricht in einem Aufruf von „__builtin_constexpr_diag“ ist ein Zeichenfolgenliteral oder ein Objekt mit der Darstellung von „std::string_view“ erforderlich.", + "Das Tag in einem Aufruf von \"__builtin_constexpr_diag\" darf nur Buchstaben, Ziffern und Unterstriche enthalten.", "Ungültiges Tag in der „constexpr“-Diagnosesteuerungsoption: %s", - "a token sequence must be introduced by \"^^\"", - "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", + "Eine Tokensequenz muss mit „^^“ eingeleitet werden.", + "Es wurde ein Interpolator erwartet ('\\[', '\\[:', '\\{', '\\val' oder '\\str')", "%sq ist kein Bezeichner", - "the operand of a \"\\{...}\" interpolator is not a token sequence", + "Der Operand eines „\\{...}“-Interpolators ist keine Tokensequenz.", "Diese Deklaration von %n deklariert nicht denselben Typ wie die Deklaration %p." ] diff --git a/Extension/bin/messages/es/messages.json b/Extension/bin/messages/es/messages.json index 7aedebde0..04a1140ba 100644 --- a/Extension/bin/messages/es/messages.json +++ b/Extension/bin/messages/es/messages.json @@ -2715,7 +2715,7 @@ "acceso a %n no válido en un objeto del tipo %t completo", "%sq no se permite aquí", "%sq no permite varios declaradores", - "initialization with \"{...}\" is not allowed for %sq", + "no se permite la inicialización con '{...}' para %sq", "%sq debe ser un marcador de posición para el tipo completo de la variable (no para un componente de ese tipo)", "una variable declarada con %sq requiere un inicializador", "la constante de tipo entero debe ser mayor o igual que cero", @@ -3783,20 +3783,20 @@ "el tipo no es similar a C debido a esta expresión lambda", "un calificador de nombre de tipo de enumeración es una característica de C++11", "las uniones sin restricciones son una característica de C++11", - "a pack expansion cannot be used as an argument for non-pack %n1 of %n2", + "no se puede usar una expansión de paquete como argumento para el parámetro %n1, que no es un paquete, de %n2", "el intervalo pasado a la metafunción no se puede iterar", "intérprete:", "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", - "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", + "una llamada a \"__builtin_constexpr_diag\" requiere tres argumentos", + "el primer argumento de una llamada a \"__builtin_constexpr_diag\" debe ser 0 (nota), 1 (advertencia), 2 (error), 16 (nota en el llamador), 17 (advertencia en el llamador) o 18 (error en el llamador)", + "se necesita un literal de cadena o un objeto con la representación de std::string_view para la etiqueta y el mensaje de una llamada a \"__builtin_constexpr_diag\"", + "la etiqueta de una llamada a \"__builtin_constexpr_diag\" solo puede contener letras, dígitos y caracteres de subrayado", "invalid tag in constexpr diagnostic control option: %s", - "a token sequence must be introduced by \"^^\"", - "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", + "una secuencia de tokens debe comenzar por '^^'", + "se esperaba un interpolador ('\\[', '\\[:', '\\{', '\\val' o '\\str')", "%sq no escribe un identificador", - "the operand of a \"\\{...}\" interpolator is not a token sequence", + "el operando de un interpolador '\\{...}' no es una secuencia de tokens", "esta declaración de %n no declara el mismo tipo que la declaración %p" ] diff --git a/Extension/bin/messages/fr/messages.json b/Extension/bin/messages/fr/messages.json index 8fc9d961c..18c062bd4 100644 --- a/Extension/bin/messages/fr/messages.json +++ b/Extension/bin/messages/fr/messages.json @@ -2713,11 +2713,11 @@ "échec de l'initialisation des métadonnées", "conversion de base vers dérivée non valide (le type réel de la classe dérivée est %t)", "accès non valide à %n dans l'objet de type complet %t", - "%sq not allowed here", - "%sq does not permit multiple declarators", - "initialization with \"{...}\" is not allowed for %sq", + "%sq non autorisé ici", + "%sq n’autorise pas plusieurs déclarateurs", + "l’initialisation avec '{...}' n’est pas autorisée pour %sq", "%sq doit être un espace réservé pour le type complet de la variable (et non pour un composant de ce type)", - "a variable declared with %sq requires an initializer", + "une variable déclarée avec %sq nécessite un initialiseur", "une constante entière doit être supérieure ou égale à zéro", "le type doit être un type intégral", "impossible d'interpréter l'expression", @@ -3750,7 +3750,7 @@ "la syntaxe abrégée du modèle de fonction n’est pas standard pour les guides de déduction", "les paramètres explicites « this » sont une fonctionnalité de C++23", "les désignateurs de tableau ne sont pas pris en charge dans les contextes de déduction de modèle", - "the second argument must be an integer type with the same shape (a scalar or vector type) as the first argument", + "le deuxième argument doit être de type entier et avoir la même forme (type scalaire ou vectoriel) que le premier argument", "l’argument doit être un vecteur de types booléens", "l’argument doit être un pointeur vers un type scalaire", "type d’argument incorrect (il doit s’agir de %t)", @@ -3783,20 +3783,20 @@ "le type n’est pas similaire à C en raison de cette expression lambda", "un qualificateur de nom de type énumération est une fonctionnalité C++11", "les unions sans restriction sont une fonctionnalité C++11", - "a pack expansion cannot be used as an argument for non-pack %n1 of %n2", - "the range passed to the metafunction cannot be iterated", - "interpreter:", + "une expansion de pack ne peut pas être utilisée comme argument pour le paramètre %n1 (qui n’est pas un pack) de %n2", + "la plage transmise à la métafonction ne peut pas être parcourue", + "interpréteur :", "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", - "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", + "un appel à « __builtin_constexpr_diag » nécessite trois arguments", + "Le premier argument dans un appel à '__builtin_constexpr_diag' doit être 0 (remarque), 1 (avertissement), 2 (erreur), 16 (remarque au niveau de l’appelant), 17 (avertissement au niveau de l’appelant) ou 18 (erreur au niveau de l’appelant)", "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", + "l’étiquette dans un appel à « __builtin_constexpr_diag » peut uniquement contenir des lettres, des chiffres et des traits de soulignement", "invalid tag in constexpr diagnostic control option: %s", - "a token sequence must be introduced by \"^^\"", - "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", - "%sq does not spell an identifier", - "the operand of a \"\\{...}\" interpolator is not a token sequence", - "this declaration of %n does not declare the same type as the declaration %p" + "une séquence de jetons doit commencer par « ^^ »", + "interpolateur attendu (« \\[ », « \\[: », « \\{ », « \\val » ou « \\str »)", + "%sq ne forme pas un identifiant", + "l’opérande de l’interpolateur « \\{...} » n’est pas une séquence de jetons", + "cette déclaration de %n ne déclare pas le même type que la déclaration %p" ] diff --git a/Extension/bin/messages/it/messages.json b/Extension/bin/messages/it/messages.json index bcffbda92..2522ced36 100644 --- a/Extension/bin/messages/it/messages.json +++ b/Extension/bin/messages/it/messages.json @@ -2715,7 +2715,7 @@ "accesso non valido a %n nell'oggetto del tipo completo %t", "%sq non è consentito in questo punto", "%sq non consente l'uso di più dichiaratori", - "initialization with \"{...}\" is not allowed for %sq", + "l'inizializzazione con '{...}' non è consentita per %sq", "%sq deve essere un segnaposto per il tipo completo della variabile e non per un componente di tale tipo", "in una variabile dichiarata con %sq è richiesto un inizializzatore", "la costante Integer deve essere maggiore o uguale a zero", @@ -3789,14 +3789,14 @@ "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", - "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", + "una chiamata a '__builtin_constexpr_diag' richiede tre argomenti", + "il primo argomento di una chiamata a '__builtin_constexpr_diag' deve essere 0 (nota), 1 (avviso), 2 (errore), 16 (nota nel chiamante), 17 (avviso nel chiamante) o 18 (errore nel chiamante)", + "per il tag e il messaggio in una chiamata a '__builtin_constexpr_diag' è necessaria una stringa letterale o un oggetto con la rappresentazione di std::string_view", + "il tag in una chiamata a '__builtin_constexpr_diag' può contenere solo lettere, cifre e caratteri di sottolineatura", "tag non valido nell'opzione di controllo della diagnostica constexpr: %s", - "a token sequence must be introduced by \"^^\"", - "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", + "una sequenza di token deve essere preceduta da '^^'", + "interpolatore atteso ('\\[', '\\[:', '\\{', '\\val' o '\\str')", "%sq non forma un identificatore", - "the operand of a \"\\{...}\" interpolator is not a token sequence", + "l'operando di un interpolatore '\\{...}' non è una sequenza di token", "questa dichiarazione di %n non dichiara lo stesso tipo della dichiarazione %p" ] diff --git a/Extension/bin/messages/ja/messages.json b/Extension/bin/messages/ja/messages.json index 33c35787f..c865dd627 100644 --- a/Extension/bin/messages/ja/messages.json +++ b/Extension/bin/messages/ja/messages.json @@ -2715,7 +2715,7 @@ "完全な型 %t のオブジェクトの %n へのアクセス権が無効です", "%sq はここでは使用できません", "%sq には複数の宣言子は使用できません", - "initialization with \"{...}\" is not allowed for %sq", + "'{...}' による初期化は %sq では許可されていません", "%sq は、変数の完全な型のプレースホルダーである必要があります (その型のコンポーネント用ではありません)", "%sq で宣言された変数には初期化子が必要です", "整数型の定数はゼロ以上である必要があります", @@ -3789,14 +3789,14 @@ "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", + "'__builtin_constexpr_diag' の呼び出しには 3 つの引数が必要です", "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", + "タグと '__builtin_constexpr_diag' の呼び出しのメッセージには、文字列リテラルまたは std::string_view の表現を持つオブジェクトが必要です", + "'__builtin_constexpr_diag' の呼び出しのタグには、文字、数字、アンダースコアのみを含めることができます", "constexpr 診断制御オプションのタグが無効です: %s", - "a token sequence must be introduced by \"^^\"", - "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", + "トークン シーケンスは '^^' によって導入する必要があります", + "補間子 ('\\['、'\\[:'、'\\{'、'\\val'、または '\\str') が必要です", "%sq は識別子をスペルしません", - "the operand of a \"\\{...}\" interpolator is not a token sequence", + "'\\{...}' 補間子のオペランドは、トークン シーケンスではありません", "%n のこの宣言は、宣言 %p と同じ型を宣言しません" ] diff --git a/Extension/bin/messages/ko/messages.json b/Extension/bin/messages/ko/messages.json index ab7c28004..a56a7cc2a 100644 --- a/Extension/bin/messages/ko/messages.json +++ b/Extension/bin/messages/ko/messages.json @@ -2715,7 +2715,7 @@ "완전한 형식 %t의 개체에서 %n에 대한 액세스가 잘못되었습니다.", "%sq은(는) 여기에서 사용할 수 없습니다.", "%sq에는 선언자를 여러 개 사용할 수 없습니다.", - "initialization with \"{...}\" is not allowed for %sq", + "'{...}'로 초기화하는 것은 %sq에 허용되지 않습니다.", "%sq은(는) 변수의 전체 형식을 나타내는 자리 표시자여야 하며, 해당 형식의 구성 요소를 나타내는 자리 표시자여서는 안 됩니다.", "%sq (으)로 선언된 변수에는 이니셜라이저가 필요합니다.", "정수 상수는 0보다 크거나 같아야 합니다.", @@ -3789,14 +3789,14 @@ "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", + "'__builtin_constexpr_diag'를 호출하려면 인수가 3개 필요합니다.", "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", + "문자열 리터럴 또는 std::string_view 표현이 있는 개체는 '__builtin_constexpr_diag'에 대한 호출의 태그 및 메시지에 필요합니다.", + "'__builtin_constexpr_diag'에 대한 호출의 태그에는 문자, 숫자 및 밑줄만 포함될 수 있습니다.", "constexpr 진단 제어 옵션의 잘못된 태그: %s", - "a token sequence must be introduced by \"^^\"", - "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", - "%sq does not spell an identifier", - "the operand of a \"\\{...}\" interpolator is not a token sequence", + "토큰 시퀀스는 '^^'로 시작해야 합니다.", + "보간기가 필요합니다('\\[', '\\[:', '\\{', '\\val' 또는 '\\str').", + "%sq은(는) 식별자를 나타내지 않습니다.", + "'\\{...}' 보간기의 피연산자는 토큰 시퀀스가 아닙니다.", "이 선언 %n은(는) 선언 %p과(와) 동일한 형식을 선언하지 않습니다." ] diff --git a/Extension/bin/messages/pl/messages.json b/Extension/bin/messages/pl/messages.json index 128c0aa6e..eeda0837c 100644 --- a/Extension/bin/messages/pl/messages.json +++ b/Extension/bin/messages/pl/messages.json @@ -2715,7 +2715,7 @@ "nieprawidłowy dostęp do elementu %n w obiekcie, którego pełny typ to %t", "element %sq nie jest dozwolony w tym miejscu", "element %sq nie zezwala na wiele deklaratorów", - "initialization with \"{...}\" is not allowed for %sq", + "inicjowanie za pomocą „{...}” jest niedozwolone dla %sq", "%sq musi być symbolem zastępczym dla pełnego typu zmiennej (nie dla składnika tego typu)", "zmienna zadeklarowana za pomocą elementu %sq wymaga inicjatora", "stała całkowita musi być równa zero lub większa", @@ -3783,20 +3783,20 @@ "typ nie jest C-podobny z powodu tego wyrażenia lambda", "kwalifikator nazwy typu wyliczeniowego jest funkcją języka C++11", "nieograniczone unie są funkcją języka C++11", - "a pack expansion cannot be used as an argument for non-pack %n1 of %n2", + "rozwinięcia pakietu nie można użyć jako argumentu dla niepakietowego %n1 z %n2", "zakresu przekazanego do metafunkcji nie można iterować", "interpreter:", "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", - "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", + "wywołanie funkcji „__builtin_constexpr_diag” wymaga trzech argumentów", + "pierwszym argumentem w wywołaniu funkcji „__builtin_constexpr_diag” musi być 0 (uwaga), 1 (ostrzeżenie), 2 (błąd), 16 (uwaga w miejscu wywołania), 17 (ostrzeżenie w miejscu wywołania) lub 18 (błąd w miejscu wywołania)", + "w wywołaniu funkcji „__builtin_constexpr_diag” dla tagu i komunikatu wymagany jest literał ciągu lub obiekt o reprezentacji std::string_view", + "tag w wywołaniu funkcji „__builtin_constexpr_diag” może zawierać wyłącznie litery, cyfry i znaki podkreślenia", "nieprawidłowy tag w opcji kontroli diagnostycznej constexpr: %s", - "a token sequence must be introduced by \"^^\"", - "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", + "sekwencję tokenów musi poprzedzać „^^”", + "oczekiwano interpolatora ('\\[', '\\[:', '\\{', '\\val' lub '\\str')", "%sq nie określa pisowni identyfikatora", - "the operand of a \"\\{...}\" interpolator is not a token sequence", + "operand interpolatora „\\{...}” nie jest sekwencją tokenów", "deklaracja %n nie deklaruje tego samego typu co deklaracja %p" ] diff --git a/Extension/bin/messages/pt-br/messages.json b/Extension/bin/messages/pt-br/messages.json index 73cf91a4f..8a4a27a16 100644 --- a/Extension/bin/messages/pt-br/messages.json +++ b/Extension/bin/messages/pt-br/messages.json @@ -2713,11 +2713,11 @@ "falha na inicialização de metadados", "Conversão inválida de base para derivada (o tipo real da classe derivada é %t)", "acesso inválido a %n no objeto do tipo %t completo", - "%sq not allowed here", - "%sq does not permit multiple declarators", - "initialization with \"{...}\" is not allowed for %sq", + "%sq não é permitido aqui", + "%sq não permite vários declaradores", + "a inicialização com '{...}' não é permitida para %sq", "%sq deve ser um espaço reservado para o tipo completo da variável (não para um componente desse tipo)", - "a variable declared with %sq requires an initializer", + "uma variável declarada com %sq requer um inicializador", "o constante inteiro deve ser maior ou igual a zero", "o tipo deve ser um tipo integral", "não é possível interpretar a expressão", @@ -3750,7 +3750,7 @@ "a sintaxe abreviada de template de função é não padrão para guias de dedução", "parâmetros explícitos de 'this' são um recurso do C++23", "designadores de matriz não têm suporte em contextos de dedução de modelo", - "the second argument must be an integer type with the same shape (a scalar or vector type) as the first argument", + "o segundo argumento deve ser um tipo inteiro com a mesma forma (um tipo escalar ou de vetor) que o primeiro argumento", "o argumento deve ser um vetor de tipos boolianos", "o argumento deve ser um ponteiro para um tipo escalar", "tipo de argumento incorreto (deveria ser %t)", @@ -3783,20 +3783,20 @@ "o tipo não é semelhante a C devido a esta expressão lambda", "um qualificador de nome de tipo de enumeração é um recurso do C++11", "uniões irrestritas são um recurso do C++11", - "a pack expansion cannot be used as an argument for non-pack %n1 of %n2", - "the range passed to the metafunction cannot be iterated", - "interpreter:", + "uma expansão de pacote não pode ser usada como argumento para o parâmetro %n1, que não é um pacote, de %n2", + "o intervalo passado para a metafunção não pode ser iterado", + "interpretador:", "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", - "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", - "invalid tag in constexpr diagnostic control option: %s", - "a token sequence must be introduced by \"^^\"", - "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", - "%sq does not spell an identifier", - "the operand of a \"\\{...}\" interpolator is not a token sequence", + "uma chamada a '__builtin_constexpr_diag' requer três argumentos", + "O primeiro argumento em uma chamada para '__builtin_constexpr_diag' deve ser 0 (nota), 1 (aviso), 2 (erro), 16 (nota no chamador), 17 (aviso no chamador) ou 18 (erro no chamador)", + "um literal de cadeia de caracteres ou um objeto com a representação de std::string_view é necessário para o rótulo e a mensagem em uma chamada para '__builtin_constexpr_diag'", + "O rótulo em uma chamada para '__builtin_constexpr_diag' pode conter apenas letras, dígitos e sublinhados", + "rótulo inválido na opção de controle de diagnóstico constexpr: %s", + "uma sequência de tokens deve ser introduzida por '^^'", + "era esperado um interpolador ('\\[', '\\[:', '\\{', '\\val' ou '\\str')", + "%sq não forma um identificador", + "o operando de um interpolador '\\{...}' não é uma sequência de tokens", "Esta declaração de %n não declara o mesmo tipo que a declaração %p" ] diff --git a/Extension/bin/messages/ru/messages.json b/Extension/bin/messages/ru/messages.json index 27383c50f..b1b632690 100644 --- a/Extension/bin/messages/ru/messages.json +++ b/Extension/bin/messages/ru/messages.json @@ -2715,7 +2715,7 @@ "недопустимый доступ к %n в объекте полного типа %t", "%sq здесь не разрешен", "%sq does not permit multiple declarators", - "initialization with \"{...}\" is not allowed for %sq", + "инициализация с \"{...}\" не разрешена для %sq", "%sq должен быть заполнителем для полного типа переменной (а не для компонента этого типа)", "для переменной, объявленной с помощью %sq, требуется инициализатор", "целочисленная константа должна быть больше нуля или равна нулю", @@ -3789,14 +3789,14 @@ "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", - "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", + "вызов \"__builtin_constexpr_diag\" требует трех аргументов", + "первый аргумент при вызове функции \"__builtin_constexpr_diag\" должен быть равен 0 (примечание), 1 (предупреждение), 2 (ошибка), 16 (примечание в вызывающей программе), 17 (предупреждение в вызывающей программе) или 18 (ошибка в вызывающей программе)", + "для тега и сообщения при вызове функции \"__builtin_constexpr_diag\" требуется строковый литерал или объект, представляющий std::string_view", + "Тег в вызове \"__builtin_constexpr_diag\" может содержать только буквы, цифры и символы подчеркивания", "недопустимый тег в параметре диагностического контроля constexpr: %s", - "a token sequence must be introduced by \"^^\"", - "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", + "последовательность токенов должна начинаться с \"^^\"", + "требуется интерполятор (\"\\[\", \"\\[:\", \"\\{\", \"\\val\" или \"\\str\")", "%sq не образует идентификатор", - "the operand of a \"\\{...}\" interpolator is not a token sequence", + "операнд интерполятора \"\\{...}\" не является последовательностью токенов", "это объявление %n не объявляет тот же тип, что и объявление %p" ] diff --git a/Extension/bin/messages/tr/messages.json b/Extension/bin/messages/tr/messages.json index 13cbb91b5..de30d890a 100644 --- a/Extension/bin/messages/tr/messages.json +++ b/Extension/bin/messages/tr/messages.json @@ -2713,11 +2713,11 @@ "meta veriler başlatılamadı", "temelden türetilmişe dönüştürme işlemi geçersiz (gerçek türetilmiş sınıf türü %t)", "tam %t türünün nesnesindeki %n öğesine geçersiz erişim", - "%sq not allowed here", - "%sq does not permit multiple declarators", - "initialization with \"{...}\" is not allowed for %sq", - "%sq must be a placeholder for the complete type of the variable (not for a component of that type)", - "a variable declared with %sq requires an initializer", + "%sq burada kullanılamaz", + "%sq birden fazla bildirimciye izin vermez", + "%sq için '{...}' ile başlatmaya izin verilmiyor", + "%sq, değişkenin tam türü için yer tutucu olmalıdır (bu türde bir bileşen için değil)", + "%sq ile bildirilen değişken için başlatıcı gerekir", "sabit tam sayı değeri sıfırdan büyük veya sıfıra eşit olmalıdır", "tür, tam sayı türünde olmalıdır", "ifade yorumlanamıyor", @@ -3750,7 +3750,7 @@ "kısaltılmış işlev şablonu sözdizimi çıkarsama kılavuzları için standart değil", "açık 'this' parametreleri bir C++23 özelliğidir", "dizi belirleyicileri şablon çıkarsama bağlamlarında desteklenmez", - "the second argument must be an integer type with the same shape (a scalar or vector type) as the first argument", + "ikinci bağımsız değişken, birinci bağımsız değişkenle aynı şekle (skaler veya vektör türü) sahip bir tamsayı türünde olmalıdır", "bağımsız değişken, boole türlerinden bir vektör olmalıdır", "bağımsız değişken, skaler bir türe yönelik işaretçi olmalıdır", "yanlış bağımsız değişken türü (%t olmalıdır)", @@ -3785,18 +3785,18 @@ "kısıtlanmamış birleşimler bir C++11 özelliğidir", "a pack expansion cannot be used as an argument for non-pack %n1 of %n2", "the range passed to the metafunction cannot be iterated", - "interpreter:", + "yorumlayıcı:", "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", + "'__builtin_constexpr_diag' çağrısı üç bağımsız değişken gerektirir", "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", - "invalid tag in constexpr diagnostic control option: %s", - "a token sequence must be introduced by \"^^\"", + "'__builtin_constexpr_diag' çağrısında etiket ve ileti için bir dize sabit değeri veya std::string_view gösterimine sahip bir nesne gereklidir", + "'__builtin_constexpr_diag' çağrısındaki etiket yalnızca harf, rakam ve alt çizgi içerebilir", + "constexpr tanılama denetimi seçeneğinde geçersiz etiket: %s", + "bir belirteç dizisinin başında '^^' bulunmalıdır", "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", "%sq does not spell an identifier", "the operand of a \"\\{...}\" interpolator is not a token sequence", - "this declaration of %n does not declare the same type as the declaration %p" + "bu %n bildirimi, %p bildirimi ile aynı türü bildirmez" ] diff --git a/Extension/bin/messages/zh-cn/messages.json b/Extension/bin/messages/zh-cn/messages.json index bffb120e8..40e3fc529 100644 --- a/Extension/bin/messages/zh-cn/messages.json +++ b/Extension/bin/messages/zh-cn/messages.json @@ -2715,9 +2715,9 @@ "对完整类型 %t 的对象中的 %n 的访问无效", "此处不允许使用 %sq", "%sq 不允许使用多个声明符", - "initialization with \"{...}\" is not allowed for %sq", + "不允许对 %sq 使用 \"{...}\" 进行初始化", "%sq 必须是用于完整变量类型的占位符(不适用于此类型的组件)", - "a variable declared with %sq requires an initializer", + "使用 %sq 声明的变量需要初始化表达式", "整型常数必须大于等于零", "类型必须是整型类型", "表达式无法解释", @@ -3789,12 +3789,12 @@ "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", + "调用 \"__builtin_constexpr_diag\" 需要三个参数", "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", + "调用 \"__builtin_constexpr_diag\" 时,标记和消息需要字符串字面量或具有 std::string_view 表示形式的对象", + "对 “__builtin_constexpr_diag” 的调用中的标记只能包含字母、数字和下划线", "constexpr 诊断控制选项中的标记无效: %s", - "a token sequence must be introduced by \"^^\"", + "标记序列必须由 \"^^\" 引入", "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", "%sq 未拼写为标识符", "the operand of a \"\\{...}\" interpolator is not a token sequence", diff --git a/Extension/bin/messages/zh-tw/messages.json b/Extension/bin/messages/zh-tw/messages.json index f0bf48136..b314c2dd3 100644 --- a/Extension/bin/messages/zh-tw/messages.json +++ b/Extension/bin/messages/zh-tw/messages.json @@ -3789,12 +3789,12 @@ "%s1 %s2", "%s1 %s2", "%s1 %s2", - "a call to \"__builtin_constexpr_diag\" requires three arguments", - "the first argument in a call to \"__builtin_constexpr_diag\" must be 0 (remark), 1 (warning), 2 (error), 16 (remark at caller), 17 (warning at caller), or 18 (error at caller)", - "a string literal or an object with the representation of std::string_view is required for the tag and the message in a call to \"__builtin_constexpr_diag\"", - "the tag in a call to \"__builtin_constexpr_diag\" may contain only letters, digits, and underscores", + "呼叫 '__builtin_constexpr_diag' 需要三個引數", + "呼叫 '__builtin_constexpr_diag' 時,第一個引數必須是 0 (備註)、1 (警告)、2 (錯誤)、16 (呼叫端備註)、17 (呼叫端警告) 或 18 (呼叫端錯誤)", + "呼叫 '__builtin_constexpr_diag' 時,標籤和訊息必須使用字串常值或具有 std::string_view 表示的物件", + "呼叫 '__builtin_constexpr_diag' 中的標籤只能包含字母、數字和底線", "invalid tag in constexpr diagnostic control option: %s", - "a token sequence must be introduced by \"^^\"", + "Token 序列必須以 '^^' 開頭", "expected an interpolator (\"\\[\", \"\\[:\", \"\\{\", \"\\val\", or \"\\str\")", "%sq 無法拼出識別碼", "the operand of a \"\\{...}\" interpolator is not a token sequence",